Inkjet printing of viable cells on a target surface: Preparation and Calibration
- 발행기관 서강대학교 일반대학원
- 지도교수 신관우
- 발행년도 2012
- 학위수여년월 2012. 8
- 학위명 석사
- 학과 및 전공 일반대학원 화학과
- 실제URI http://www.dcollection.net/handler/sogang/000000047610
- 본문언어 영어
- 저작권 서강대학교 논문은 저작권 보호를 받습니다.
초록/요약
본 연구의 목적은 생물학적 활성 입자 또는 세포를 포함하는 바이오 잉크를 상업용 잉크젯 프린트를 통해 프린터의 정밀도를 관찰하고 세포가 얼마만큼 선택적으로 우리가 원하는 패턴에 반응하여 번식하는지 관찰하는 것이다. 미리 지정한 미세한 크기의 패턴을 이론 값의 크기와 거의 일치하게 프린트 하는 데에 성공하였다. 세포를 직접 프린트하기에 앞서, 세포와 비슷한 크기의 형광 비드를 이용하여 시범 실험을 하였고, 세포 실험에 임하였다. Human mammary epithelial cells (HMECs) 를 piezo-electric 잉크젯 프린터에서 출력하여, 최소 0.58mm2에서 3개까지 제어를 가능하였고, 세포의 생존율은 프린트 전의 세포 생존율 대비 88 % 이상을 보였다. 차후에 PEG를 이용하여 세포를 선택적으로 붙게 하는 표면 처리법을 하였다.
more초록/요약
The purpose of this study is to demonstrate that bio-inks, containing biologically active particles or cells, can be delivered on pre-determined patterns using a commercial inkjet printer. Experimental sizes of dots were almost similar with theoretical size that we could determine further pattern sizes. Fluorescence bids which are similar size with cells were used as a demonstrate printing before cell printing. We printed human mammary epithelial cells (HMECs) by using piezo-electric inkjet printer which we could control very small amount, 3-6 cells, and the viabilities as compare to before printing was more than 88 %. Afterward amino-terminated PEG was coated on substrates for selective cells adhesion.
more