검색 상세

TD/CDMA 무선통신 시스템을 위한 Joint Detector 설계 : Implementation of Joint Detector for TD/CDMA Wireless Communication Systems

  • 발행기관 서강대학교 대학원
  • 지도교수 김영록
  • 발행년도 2005
  • 학위수여년월 200508
  • 학위명 석사
  • 학과 및 전공 전자공학
  • 식별자(기타) 000000084533
  • 본문언어 한국어

초록/요약

3세대 이동 통신 시스템은 TDD (time division duplex) 모드에서 TD/CDMA (time division/code division multiple access)를 사용한다. TD/CDMA의 TDMA (time division multiple access) 성분 때문에 joint detection 기술이 적당한 복잡도로 구현이 가능하다. TD/CDMA 이동 통신 시스템에서 joint detection은 모든 사용자들에 대한 정보가 포함된 block-Toeplitz 구조를 가지는 큰 시스템 행렬의 least square 문제를 푸는 것과 같다. 그러므로 가능한 한 joint detector의 성능의 감소를 줄이면서 더 작은 복잡도를 가지는 알고리즘과 구현이 개발되어야 한다. Block-Toeplitz 구조를 효과적으로 해결하는 여러 가지 알고리즘이 제안되었다. 본 논문에서는 다중 사용자 시스템에서 joint detection을 수행하기 위한 Schur 알고리즘과 Fourier 기법을 소개하고 역방향 전송에서의 성능 분석과 복잡도를 비교한다. 실험 결과 두 알고리즘은 비슷한 성능을 보이고 복잡도는 Fourier 기법이 더욱 작다. 기지국에 비하여 단말기는 크기와 에너지 소비가 더욱 큰 문제이기 때문에 Fourier 기법의 joint detector는 단말기에서 효과적이라고 할 수 있다. 이러한 이유로 단말기에서의 Fourier 기법을 이용한 joint detector의 효율적인 VLSI 구조를 제시한다.

more

초록/요약

The 3rd generation mobile radio systems use TD/CDMA (time division/code division multiple access) in the TDD (time division duplex). Due to the TDMA (time division multiple access) component of TD/CDMA, joint detection can be implemented with a feasible complexity. In a TD/CDMA mobile radio system, joint detection is equivalent to solving a least square problem of block-Toeplitz system matrix, which represents a significant computational effort because the amount of data that is involved. Therefore, algorithms and implementations must be developed that lower this complexity as much as possible without degrading the performance of the joint detection. This paper presents the introduction of Schur algorithm and Fourier technique to perform joint detection in the multi-user system and comparison of the performance and computational complexity between these two algorithms in the 3GPP downlink. Simulation results show these two algorithms have almost same performance. But the computational complexity of joint detection using Fourier can be reduced much more than Schur algorithm. Since size and energy consumption are more critical at the mobile than at the base station, joint detection using Fourier technique is more efficient. So this paper shows VLSI architecture of joint detection using Fourier technique at the mobile.

more